Chemical Protective Suits
|
Thank you for purchasing our company's products, and for your safety and health, please read the manual carefully before using.
RFH-01 Air-tight Chemical Protective Suits produced in our company is strictly detected and is according to the EU standard of BS EN943-1：2002 . The raw materials we use are also detected and is complied to the requirements of the terms in BS EN943-1：2002.
RFH-01 Air-tight Chemical Protective Suits is one kind of the fireman suits which is worn when the firemen fight with fire or rescue in the places where there are dangerous chemicals or caustic things and they use this to protect themselves from the possible harm of the chemicals or the caustic things.
The main part of the rubberized fabric of RFH-01 Air-tight Chemical Protective Suits uses the silk cloth which is processed by flame-retardant and tackifying methods. Both of its two sides are covered with chemical-protective face-glue. The rubberized fabric only carbonizes but without melting drops and keeps good strength when contacting with fire. The rubberized fabric is made into the main part of the suits and gloves through the process of paste, tailoring, and hot-sealing strip. It can also be made into the whole suits by combining with fire-retardant, voltage resistant, anti-puncture boots or fire-fighting boots.
|
|
1 Sizes
|
|
Sizes
|
S
|
M
|
L
|
XL
|
|
Length（From collar to boots）（cm）
|
160
|
166
|
171
|
177
|
|
Chest circumference（cm）
|
55
|
56
|
57
|
58
|
|
Waistline（cm）
|
115
|
122
|
125
|
126
|
|
Shoe size（cm）
|
25
|
26
|
27
|
27
|
|
Body Heights（cm）
|
165－170
|
170－175
|
175－180
|
180－185
|
|
|
2 Main technical parameters
（1）The main part of the rubberized fabric
The thickness of the rubberized fabric 0.45+0.05mm
The tensile strength average of the Longitude and Latitude not less than 450N/5cm
The tearing strength average of the Longitude and Latitude not less than 32N
The performance of Anti-sour penetration (10mm×1h)(80％H2S04,60％HN03,30％HCL) No penetration
The performance of Anti-sour penetration （6.1mo1/LNa0H） No penetration
The performance of fire retardant the lasting time of burning not over 2s
The time of stopping fire not over 10s the length destroyed not over 10cm
Anti-aging caused by hot （125℃×24h）not pitchy, not brittle
The performance of anti-coldness （-25℃×5minfolded to 180°）without cracks
The performance of anti-petrol （soaked in120＃petrol for 30s）no cracks nor pitchy
The adherisive strength between the fabric and the glue not less than 0.78KN/M
（2）The table below is the performance of fire-fighting boots
|
|
Fire-fighting boots
|
|
1 The rate of the tearing length of the boots surface：≥450％
|
|
2 The performance of anti- penetration of the boots bottom：≥900N
|
|
3 The performance of anti- wear of the boots bottom：≤0.9cm3/1.61km
|
|
4 The performance of anti- oil of the boots bottom：surface and bottom of the shoes，-2～10％
|
|
5 The strength of sticky of the sticky strips：≥600N/m
|
|
6 The anti-voltage of the boots bottom：≥5000V
|
|
7 The tearing length of the shoe surface after aging ：≥75％
|
|
8 The performance of anti-corrosion of the steel gasket No corrosion
|
|
9 The performance of anti-hot of the boots bottom：≤22℃
|
|
10 The performance of anti-slippery of the boots：≥115°
|
|
11 Weight：≤1.8kg
|
|
12 The performance of anti-penetration：Water immersion 2h no penetration
|
|
